Laser cutting Norrköping
For laser cutting in Norrköping, we promise both time and cost-effective production according to your high standards. Welcome to us at Plåt & Mekano Romator.
Laser cutting has many advantages
Our combination laser machines allow you to get complicated shapes and patterns from a sheet metal blank, with thicknesses ranging from 0.3 mm up to 10 mm. Because we have an integrated punching machine in the laser machine, we can also make embossings, dents and threads directly in the machine in the same set-up. This saves time and keeps production costs down.
Laser cutting is now our main niche, and after 20 years of experience, we now cut beautiful details with precise cuts according to high finish requirements. However, we can't cut just any material as our lasers are CO2 type, but talk to us about your project. We can always help you find the right method.
- Choose laser cutting when you want to cut advanced shapes with fine cuts
- It is a time and cost effective method
- Laser cutting can handle rapid changeovers and dimensional changes
- Wide range of moulding options thanks to large selection of tools
Don't hesitate - get in touch with your questions!
Do you have any questions about our services or products? Just get in touch with one of our competent employees!
Contact usHow does laser cutting work?
From a high-power laser, a focused, perpendicular and thin beam is directed at the workpiece, converting the energy of the surface into heat. The area then melts or vaporises completely. Laser cutting begins when the laser beam penetrates the material, which happens at a certain point. The laser system then separates the material in the process according to a chosen template.
The thickness of the sheets that can be laser cut depends on various factors:
- Machine performance
- Cutting speed
- Material quality
- The skill and routine of the operator to set all the parameters of the machine.
We at Plåt & Mekano have long experience and good knowledge of all these points.
Laser cutting with Plåt & Mekano in Norrköping.
- You get flexible and cost-effective production
- We can cut from about 0.5 to 10 mm in steel, 0.5 to 5 mm in aluminium and 0.3 to 5 mm in stainless steel.
- Our 20 years of knowledge and experience in laser cutting and punching with combi machines gives you the right results to meet the highest standards of finish.
- We have a picking robot for unloading to a conveyor belt.
Modern combi laser machines for laser cutting in Norrköping, Sweden
Our laser department has no less than three combination laser machines, two Apelio laser combination machines and an Amada LC 2012 C1, which are in production around the clock. This represents a very good capacity in the industry. Our modern combi laser machines can perform both laser-cut sheet metal and punching with tools, where the Amada LC 2012 C1 also has unloading with a picking robot.
With us you get a fast and efficient production process, where countersinks, embossings, threads and other shapes can be made in the same machine set-up as the actual laser cutting.
For efficient production that includes laser cutting in sheet metal, companies in Norrköping are welcome to contact us.
Amada LC 2012 C1 Laser cutting combination machine - advantages
The Amada combi laser LC 23012 C1 is, like the other two machines, of the CO2 laser type, 2kW with integrated punching units in the same machine as the laser unit. In other words: Here we get two machines in one.
- For a part that includes mouldings, countersinks and threads, Amada saves set-up time and provides a time and cost-effective production.
- The machine can make engravings, punch markings, collars and dents, as well as punch smaller bends with tools directly in the machine.
- We can cut sheet steel 0.5 - 10 mm, stainless steel 0.5 - 5 mm and aluminium 0.5 - 5 mm.
- We can cut plates up to size 2500 x 1250 mm.
