Laser cutting Gävle
If your company in Gävle is in need of laser cutting, then we and our combination laser machines can help. At Plåt & Mekano Romator, you get a time- and cost-effective laser cutting with the right result according to high finish requirements.
Laser cutting a prominent method
Our combination laser machines allow us to cut advanced shapes and patterns from a sheet metal blank, where we cut in thicknesses from 0.3 mm up to 10 mm in some materials. The combi technology means that there is an integrated punching machine in the laser machine, which means that we can also make, for example, embossings, threads and bumps directly in the machine in the same set-up. Efficient - and cost-saving.
Laser cutting has become one of Plåt & Mekano Romator's absolute niches. With more than 20 years of experience behind us, we can manufacture attractive details with precise cuts for customers with high finish requirements.
As our lasers are of the CO2 type, not all materials can be handled. But ask us about your project and we will help you with the right method!
- With laser cutting, you can get advanced shapes with fine cuts.
- The method is both time and cost effective
- Laser cutting can handle rapid changeovers and dimensional changes
- Wide range of moulding options thanks to large selection of tools
Don't hesitate - get in touch with your questions!
Do you have any questions about our services or products? Just get in touch with one of our competent employees!
Contact usHow does laser cutting work?
A thin, perpendicular and focused laser beam from a high-power laser is directed at the workpiece, converting the energy on the surface of the sheet metal into heat and melting or vaporising the material hit by the beam.
Laser cutting begins when the laser beam has penetrated the material at a certain point. The laser system works according to a selected programme and separates the material in the process.
You can cut sheet metal of different thicknesses with laser cutting, but some factors affect the final result:
- Machine performance
- Cutting speed
- Material quality
- The skill and routine of the operator to set all the different parameters of the machine.
At Plåt & Mekano Romator, we have extensive experience in all of the above.
Laser cutting Gävle with three combined laser machines
With our three combination laser machines, we can perform both punching with tools and laser-cut sheet metal, where our latest addition also has unloading with a picking robot.
We can offer an efficient and fast production process, partly due to the fact that embossing, threading and other forming operations are carried out in the same machine set-up as the laser cutting itself.
Advantages of laser cutting at Plåt & Mekano Romator
- We can cut from about 0.5 to 10 mm in steel, 0.5 to 5 mm in aluminium and 0.3 to 5 mm in stainless steel.
- You get flexible and cost-effective production
- Our 20 years of knowledge and experience in laser cutting and punching with combi machines gives you the right results to meet the highest standards of finish.
- We have a picking robot for unloading to a conveyor belt.
So for a production that involves cutting sheet metal, you with a company in Gävle can advantageously turn to us!
Amada LC 2012 C1 Laser cutting combination machine
Our laser department has three modern combination laser machines, two Apelio combination laser machines and one Amada combination laser LC 2012 C1, which are in production around the clock. They are of the CO2 laser type, 2kW with integrated punching units in the same machine as the laser unit. In other words: It's two machines in one.
- For the right type of part that includes mouldings, countersinks and threads, this machine saves set-up time and allows for faster and more cost-effective production.
- We have a connected picking robot that unloads finished parts onto a conveyor belt.
- The machine can make engravings, punch markings, collars and dents and punch smaller bends with tools directly in the machine.
- We can cut sheet steel 0.5 - 10 mm, stainless steel 0.5 - 5 mm and aluminium 0.5 - 5 mm.
- We can cut plates up to size 2500 x 1250 mm.
